|
|
|
ServersCheck - Server Room Monitoring
|
 Visit the ServersCheck Web Site
 Download Product
|
Category: Environmental Monitoring
|
|
 |
ServersCheck markets affordable USB & network enabled sensors for monitoring
environmental conditions in server rooms: temperature, humidity, power
failure and water detection. Check out the 360° degrees sensor tour so that
you can virtually touch and feel the product. |
The sensors are managed and monitored through the ServersCheck Monitoring
Software. This software is available as a download version or as a
standalone appliance. It runs on a central system and monitors all network
based sensors over tcp/ip from one single location.
When a problem is detected, alerts can be generated via email, SMS (cell
phone text messages), telephone voice calls (using text-to-speech), signal
tower (visual and audible alerts), and much more.
By using a GSM modem alerts are sent over the cell phone network. This
ensures that alerts are still sent even when the internet or internal
network connection is down. SMS messages can also be sent to the software
to obtain status information. Check out the live SMS demo available on our
website.
Companies around the worl are using ServersCheck's products to monitor,
report and alert on their systems availability and/or conditions. The
solution is available in 38 languages. A free trial version of the software
can be downloaded from the link below.
Company: ServersCheck
Internet:
www.serverscheck.com
|
|
SP2 is an ethernet device that provides monitoring of one or two connected environmental sensors. Simply connect the SP2 to your network, assign an IP address, plug in the sensors and away you go!
SP2 is supplied complete with a temperature probe but additional Optional
Sensors are also available. SP2 automatically detects any sensors attached to ensure swift configuration.
The SP2 is supplied with a 9V dc power adapter, and the sensors require no additional power supplies or batteries.
Company: Jacarta Ltd.
Internet:
http://www.jacarta.co.uk/
|
|
The ENVIROMUX® Server Environment Monitoring
System monitors critical environmental
conditions, such as temperature, humidity, liquid
presence, motion, intrusion, and vibration.
When a sensor goes out of range a configurable
threshold, the system will notify you via email,
LEDs, alarm beacon, web page, network management
(SNMP), and SMS messages (via external GSM modem).
The system includes three internal sensors:
temperature, humidity and power. It also supports
16 external configurable sensors and eight
digital input sensors. It can now graph the data
from these sensors using MRTG for a visual
representation of the environmental conditions being monitored.
Up to eight IP network video cameras can be
associated with each ENVIROMUX for a live view of
a facility from anywhere, anytime.
Company: Network Technologies Inc.
Internet:
www.networktechinc.com
|
|
The NetBotz 420 is a fully featured monitoring solution ideal for small to medium-sized spaces that require comprehensive monitoring capabilities with moderate expandability. This next-generation solution has a modular architecture that gives the user tremendous flexibility along with rich image graphics and integrated environmental monitoring. The appliance form factor is plug-n-play, and can be up and running within 30 minutes. The web interface provides immediate sensor readings, real-time camera images, and immediate configuration. The appliance can also be wirelessly connected to an 802.11b wireless LAN. SSL encryption is standard on the NetBotz 420, providing secure transmission of alerts to prevent potential interception and misuse of camera and audio clips. Alerts can be sent via email, SNMP, or text messaging. Customizable thresholds and alert policies include specialized threshold types such as rate-of-change and above-value-too-long. Alerts can now include graphs as well as pictures, and separate alert actions can be triggered at different alert severity levels.
Company: NetBotz
Internet:
http://www.netbotz.com
|
|
The NEWPORT® iTHX transmitter let's you monitor and record Temperature, Relative Humidity and Dew Point over an Ethernet network or the Internet with no special software except a Web Browser.
The NEWPORT iTHX serves Active Web Pages to display real time readings, display charts of temperature and humidity, or log data in standard data formats for use in a spreadsheet or data acquisition program such as Excel or Visual Basic.
The virtual chart viewed on the web page is a JAVA™ Applet that records a chart over the LAN or Internet in real time. With the NEWPORT iTHX, there is no need to invest time and money learning a proprietary software program to log or chart the data.
Company: NEWPORT Electronics, Inc.
Internet:
http://www.newportus.com
|
|
The Powerware Environmental Monitoring Probe (EMP) enables you to remotely monitor environmental conditions as easily as you monitor power conditions. Using a standard Web browser, you can view the ambient temperature and humidity of the remote environment, as well as the status of two additional contact devices, such as a smoke detector or open-door sensor.
Company: Powerware
Internet:
http://www.powerware.com
|
|
|
Environmental monitoring equipment is not something new. Manufacturers, distributors, hospitals and hotels have been using the basic technology for decades to monitor industrial processes, freezer temperatures and other factors relevant to their operations. When there was a problem, a light on a control panel would switch from green to red and the engineer on duty would go take a look at what was going on. |
Some of the common probes include:
- Temperature - This is the most popular item. You can monitor the temperature for the datacenter as a whole, or can place a sensor on a particular rack. They are also useful for locations such as server closets where it is unlikely anyone will be around to notice a rise in temperature;
- Humidity - If the humidity is too high, it leads to corrosion. Too low and you have problems with excess static electricity;
- Water - Water on the floor, whether from a broken pipe or a leaky roof, can cause electrical shorts.
ActiveXperts Network Monitor supports the following models:
- Model EM1 - includes 4 groups of 3 probes to monitor temperature, humidty and wetness on three different locations;
- Model E4 - includes 4 probes to monitor temperature on four different locations;
- Model E8 - includes 8 probes to monitor temperature on eight different locations;
- Model E16/CM16 - includes 16 probes to monitor temperature on sixteen different locations.
Company: Sensatronics/ActiveXperts
Internet:
http://www.activexperts.com/activmonitor/environme
|
|
|
Environmental threats can cause a lot more damage than hardware or software
problems. Redundant hardware, backup tapes, UPS battery arrays, generators
and other fault-tolerance measures can all be rendered useless if your
server room overheats or floods. |
Enviromon.net offers a full suite of environmental monitoring solutions with
built-in email alert systems. You can monitor the following metrics:
- Temperature
- Humidity
- Water / Liquid Detection
- Smoke
- Air Flow
- Motion
- Phsyical Security
- .and more!
Company: Netmon Inc.
Internet:
www.enviromon.net
|
|
The sensorProbe8 is a low cost, monitoring device, with 8 sensor ports for sale at just $645.00 including a 1 foot temperature sensor. AKCP’s products are designed to monitor valuable infrastructure environmental conditions, power and security.
AKCP’s Ethernet-enabled sensorProbe8 is an ultra-compact, stand-alone monitoring device, which protects critical resources from environmental and physical threats. Computer Rooms, Server Rooms, Network closets, Cabinet and Enclosure racks form the key assets of the Data center and Computer Organization. As these rooms are often unattended they must be monitored on a 24 x 7 basis to prevent disaster.
The SP8 is a handy compact device. It features the capability of plugging in any of the intelligent sensors from AKCP into any of the 8 ports. This includes Temperature, Humidity, Airflow, Water Detector, Voltage, Security and Dry Contact, etc. The SP8 connects directly to a standard 10 BaseT network via a built in RJ45 socket. It comes with an enhanced web interface for easy navigation.
Company: AKCP Co. Ltd.
Internet:
http://www.akcp.com/
|
|
The Synergy Gateway is a feature-rich Ethernet gateway and data logger developed specifically for monitoring temperature controllers. Designed to offer engineers and technicians unsurpassed flexibility, the device unites three communication capabilities and a robust thermocouple monitoring system into one instrument.
The Synergy Gateway connects the industry's most popular environmental chamber temperature controllers to a LAN or the Internet via its standard on-board 10 BASE-T Ethernet interface, or optionally via an internal 36 Kbps modem, or external GSM cellular modem to facilitate wireless communication. Moreover, each module packs a 16-channel thermocouple monitoring system which, when joined in a 16-unit master/slave RS-485 daisy chain arrangement, enables the monitoring and data logging of 256 sensors on a single Web server. The device's unparalleled communication capabilities, coupled with the Synergy Gateway's capacity to acquire, analyze, and rapidly furnish precise data through its thermocouple monitoring system, empower it to effectively replace conventional chart recorders.
Company: Tidal Engineering
Internet:
http://www.tidaleng.com
|
|
|
|
Alerting
Monitoring
